Assembly of the mechanical structure of the panel before it is molded. Installation of reinforcements, level supports and possibly PVC profile for thermal break.
Molds for panels to be insulated with PU foam
Placing the panel in its mold before injection of the polyurethane foam. Various checks by measurements are carried out in order to obtain a high quality panel during the injection.
Injection of insulating polyurethane foam
Injection of polyurethane foam (isocyanate and polyol). Capacity: 4mx1.6m thickness 120cm Density of 42kg / m3 Insulation coefficient K: 0.32W / m2 CFC-free polyurethane foam 95% recycling of materials used
Various accessories can be mounted on the panels (example: gasket, door contact, façade resistance, hinge, latch, key lock). Quality control is carried out on the panel before putting it into storage.
Some products made with polyurethane foam injection
Capacity: 4mx1.6m thickness 120cm Density of 42kg / m3 Insulation coefficient K: 0.32W / m2 CFC-free polyurethane foam 95% recycling of materials used
Recyclage à 95% des matériaux employés
Facade with injected door
Hinged door, possibility of door return by integrated spring
Possible blocking of the door at 90 °
Thermal break with PVC profile
Removable seal without tools
Latch on request
Possibility of internal unlocking